2006-2011 Camry Aurion · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2006


INSPECT ENGINE COOLANT TEMPERATURE SENSOR

  1. A092795E02
    Measure the resistance between the terminals.

    Standard resistance:
    Condition
    Specified Condition
    Approx. 20°C (68°F)
    2.32 to 2.59 kΩ
    Approx. 80°C (176°F)
    0.31 to 0.326 kΩ

    If the result is not as specified, replace the sensor.

    NOTICE:
    If checking the ECT sensor in the water, do not allow water to go into the terminals. After checking, dry the sensor.

← REMOVAL (from Jun 2009)INSTALLATION (Oct 2006 – May 2009) →