2006-2011 Camry Aurion · Service Manual
ENGINE
Home
›
ENGINE
› 2GR-FE ENGINE CONTROL SYSTEM › CIRCUIT OPENING RELAY
INSPECTION
Inspection
·
Vehicles built from Oct 2006
INSPECT CIRCUIT OPENING RELAY
Using an ohmmeter, measure the resistance according to the value(s) in the table below.
Standard resistance:
Tester Connection
Specified Condition
1E-7 - 1E-13
10 kΩ or higher
1E-7 - 1E-13
Below 1 Ω (Battery voltage applied is between terminals 1E-8 and 1D-12)
← INSPECTION (from Oct 2006)
COMPONENTS (from Oct 2006) →