ADJUSTMENT
Removal / installation · Vehicles built from Jun 2006
| 1.
ADJUST WASHER NOZZLE SUB-ASSEMBLY |
 |
- Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.
- NOTICE:
- Be careful not to damage the windshield.
- HINT:
- Tape the screwdriver tip before use.
- Disconnect the washer nozzle sub-assembly from the washer hose.
- NOTICE:
- Washer nozzles cannot be reused.
Select a washer nozzle sub-assembly so that the washer fluid spray area is within the standard.


- Connect the selected washer nozzle sub-assembly to the washer hose.
- Engage the 2 claws and install the washer nozzle sub-assembly.