REMOVAL
Removal / installation · Vehicles built from Jun 2006
| 1. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH |
Remove the nut and the front wiper arm and blade assembly LH.

| 2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH |
Remove the nut and the front wiper arm and blade assembly RH.

| 3. REMOVE FRONT FENDER TO COWL SIDE SEAL LH |
Disengage the claw and remove the front fender to cowl side seal LH.

| 4. REMOVE FRONT FENDER TO COWL SIDE SEAL RH |
Disengage the claw and remove the front fender to cowl side seal RH.

| 5. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (for LHD) |
Remove the 2 clips.

Disengage the 4 claws and remove the cowl top ventilator louver sub-assembly.
| 6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (for RHD) |
Remove the 2 clips.

Disengage the 3 claws and remove the cowl top ventilator louver sub-assembly.
| 7. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY |
Disconnect the connector.

Remove the 4 bolts and the windshield wiper motor and link assembly.

| 8. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY |
Using a screwdriver, separate the No. 2 windshield wiper link rod from the crank arm pivot of the front wiper motor assembly as shown in the illustration.

- HINT:
- Tape the screwdriver tip before use.
Move the crank arm in the direction indicated by the arrow.

Remove the 3 bolts and the windshield wiper motor assembly from the windshield wiper link assembly.

