INSTALLATION
Removal / installation · Vehicles built from Jun 2006
| 1. INSTALL REAR SIDE SEATBACK ASSEMBLY LH |
Install the rear side seatback assembly with the bolt.

- Torque:
- 18 N*m{ 184 kgf*cm , 13 ft.*lbf }
| 2. INSTALL REAR SIDE SEATBACK ASSEMBLY RH |
- HINT:
- Use the same procedure for the RH and LH side.
| 3. INSTALL SEPARATE TYPE REAR SEATBACK ASSEMBLY LH |
Install the separate type rear seatback assembly with the 2 bolts.

- Torque:
- 18 N*m{ 184 kgf*cm , 13 ft.*lbf }
| 4. INSTALL SEPARATE TYPE REAR SEATBACK ASSEMBLY RH |
Install the separate type rear seatback assembly with the 2 bolts.

- Torque:
- 18 N*m{ 184 kgf*cm , 13 ft.*lbf }
| 5. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY (w/ Center Armrest) |
| 6. INSTALL REAR SEAT HEADREST ASSEMBLY |
| 7. INSTALL REAR SEAT CUSHION ASSEMBLY |
Attach the front hooks of the bench type rear seat cushion assembly to the vehicle body.

Confirm that the seat cushion is firmly installed.
- NOTICE:
- When installing the bench type rear seat cushion assembly, make sure that the seat belt buckle is not under the bench type rear seat cushion assembly.
