DISASSEMBLY
Removal / installation · Vehicles built Jun 2006 – May 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
| 1.
REMOVE REAR BENCH TYPE SEAT CUSHION COVER |
 |
Remove the 36 hog rings.


Remove the 16 hog rings and rear bench type seat cushion cover.


| 2.
REMOVE NO. 1 SEAT ARMREST CAP (w/ Center Armrest) |
 |
- Using a screwdriver, remove the No. 1 seat armrest cap.
- HINT:
- Tape the screwdriver tip before use.
| 3.
REMOVE REAR SEATBACK HINGE COVER (w/ Center Armrest) |
 |
- Remove the bolt and bush.
- Remove the rear seatback hinge cover.
| 4.
REMOVE REAR SEAT CENTER ARMREST ASSEMBLY (w/ Center Armrest) |
 |
- Remove the rear seat center armrest assembly as shown in the illustration.
- Remove the bush.
| 5.
REMOVE REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY (w/ Center Armrest) |
 |
- Disengage the 4 claws and remove the rear seat center armrest cup holder sub-assembly.
| 6.
REMOVE REAR SEAT BELT HOOK |
 |
- Remove the rear seat belt hook.
- HINT:
- Use the same procedures for the RH side and LH side.
| 7.
REMOVE REAR SEAT SHOULDER BELT GUIDE LH |
 |
Seatback:
- Remove the 2 screws and rear seat shoulder belt guide LH.
Side Seatback:
- Remove the 2 screws and rear seat shoulder belt guide LH.
| 8.
REMOVE REAR SEAT SHOULDER BELT GUIDE RH |
 |
- Remove the 2 screws and rear seat shoulder belt guide RH.
| 9.
REMOVE REAR SEATBACK LOCK BEZEL UPPER (for RH Side) |
 |
- Disengage the 4 claws and remove the rear seatback lock bezel upper.
| 10.
REMOVE REAR SEAT HEADREST SUPPORT (for RH Side) |
 |
- Disengage the 2 hooks and separate the rear separate type seatback cover.
- Remove the 7 hog rings.
- Disengage the 2 claws and remove each rear seat headrest supports.
| 11.
REMOVE REAR SEATBACK LOCK BEZEL UPPER (for LH Side) |
 |
- Disengage the 4 claws and remove the rear seatback lock bezel upper.
| 12.
REMOVE REAR SEAT HEADREST SUPPORT (for LH Side) |
 |
- Disengage the 2 hooks and separate the rear separate type seatback cover.
- Remove the 6 hog rings.
- Disengage the 2 claws and remove each rear seat headrest supports.
| 13.
REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY RH |
 |
- Remove the rear seatback frame sub-assembly RH.
| 14.
REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY LH |
 |
- Remove the rear seatback frame sub-assembly LH.
| 15.
REMOVE REAR SEPARATE TYPE SEATBACK COVER RH (w/o Center Armrest) |
 |
- Remove the 11 hog rings and rear separate type seatback cover.
| 16.
REMOVE REAR SEPARATE TYPE SEATBACK COVER RH (w/ Center Armrest) |
 |
- Remove the 7 hog rings.
- Remove the 9 hog rings and rear separate type seatback cover.
| 17.
REMOVE REAR SEPARATE TYPE SEATBACK COVER LH |
 |
- Remove the 9 hog rings and rear separate type seatback cover.