INSTALLATION
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1.
INSTALL ENGINE HOOD COURTESY SWITCH (for 2AZ-FE RHD) |
 |
- Install the engine hood courtesy switch with the 2 screws.
| 2.
INSTALL ENGINE HOOD COURTESY SWITCH (for 2GR-FE RHD) |
 |
- Install the engine hood courtesy switch with the 2 screws.
| 3.
INSTALL HOOD LOCK TENSION SPRING B (for 2AZ-FE RHD) |
 |
- Install the tension spring B.
| 4.
INSTALL HOOD LOCK TENSION SPRING B (for 2GR-FE RHD) |
 |
- Install the tension spring B.
| 5.
INSTALL HOOD LOCK TENSION SPRING A (for 2AZ-FE RHD) |
 |
- Install the tension spring A.
| 6.
INSTALL HOOD LOCK TENSION SPRING A (for 2GR-FE RHD) |
 |
- Install the tension spring A.
| 7.
INSTALL HOOD LOCK ASSEMBLY (for 2AZ-FE RHD)
|
 |
- Apply MP grease to the sliding areas of the lock.
- Connect the hood lock control cable.
- Install the hood lock assembly with the 3 bolts.
-
Torque:
- 7.5 N*m{
77 kgf*cm
, 66 in.*lbf
}
Connect the connector.
| 8.
INSTALL HOOD LOCK ASSEMBLY (for 2GR-FE RHD)
|
 |
- Apply MP grease to the sliding areas of the lock.
- Connect the hood lock control cable.
- Install the hood lock assembly with the 3 bolts.
-
Torque:
- 7.5 N*m{
77 kgf*cm
, 66 in.*lbf
}
Connect the connector.
| 9.
INSTALL LOW PITCHED HORN ASSEMBLY (for 2AZ-FE)
|
 |
- Install the low pitched horn assembly with the bolt.
-
Torque:
- 20 N*m{
204 kgf*cm
, 15 ft.*lbf
}
Connect the connector.
| 10.
INSTALL LOW PITCHED HORN ASSEMBLY (for 2GR-FE)
|
 |
- Install the low pitched horn assembly with the bolt.
-
Torque:
- 20 N*m{
204 kgf*cm
, 15 ft.*lbf
}
Connect the connector.
| 11.
INSTALL FRONT BUMPER ASSEMBLY (for 2AZ-FE) |
 |
Install the front bumper assembly (Click here).
| 12.
INSTALL FRONT BUMPER ASSEMBLY (for 2GR-FE) |
 |
Install the front bumper assembly (Click here).