C1201/51 Engine Control System Malfunction
Diagnostic trouble codes · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
DESCRIPTION
If a malfunction in the engine control system is detected, the operations of VSC and TRC are prohibited by the fail safe function (Click here).When the signals from the engine are input normally, the fail safe is canceled and the DTC is not stored.
| DTC No. |
DTC Detecting Condition |
Trouble Area |
| C1201/51 |
A trouble signal in the engine control system is input. |
Engine control system |
INSPECTION PROCEDURE
| 1. CHECK DTC (ENGINE CONTROL SYSTEM) |
Clear the DTCs (engine control system) (Click here for 2AZ-FE, or Click here for 2GR-FE).
Perform a road test.
Check for the DTCs (engine control system) (Click here for 2AZ-FE, or Click here for 2GR-FE).
- Result:
Result
Proceed to
DTC (engine control system) is not output (for 2AZ-FE)
A
DTC (engine control system) is not output (for 2GR-FE)
B
DTC (engine control system) is output (for 2AZ-FE)
C
DTC (engine control system) is output (for 2GR-FE)
D
|
|
||||
|
|
||||
|
|
||||
| A | ||
| ||
