INSTALLATION
Removal / installation · Vehicles built Jun 2006 – Sep 2006
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1.
INSTALL TRANSPONDER KEY AMPLIFIER
|
 |
Align the transponder key amplifier with the upper bracket. Tilt the amplifier slightly and slide it into position.
- Push the transponder key amplifier to install it to the upper bracket.
- NOTICE:
- Do not push the amplifier with excessive force.
| 2.
INSTALL STEERING COLUMN COVER
|
 |
- Engage the claw and install the upper steering column cover.
- Engage the 2 claws.
Install the lower steering column cover with the 2 screws.
-
Torque:
- 2.0 N*m{
20 kgf*cm
, 18 in.*lbf
}
| 3.
INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
|
 |
Install the air hose and connect the connector.
- Engage the claw and the 4 clips.
Connect the hood lock control cable assembly.
Engage the 2 claws and connect the connector.
Install the lower No. 1 instrument panel finish panel with the screw and bolt.
| 4.
INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
|
 |
- Engage the 2 clips.
Install the cowl side trim sub-assembly LH with the cowl side trim clip.
| 5.
INSTALL FRONT DOOR SCUFF PLATE LH
|
 |
- Engage the 7 claws and 3 clips, then install the front door scuff plate LH.