2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. REMOVE FRONT DOOR SCUFF PLATE LH

  1. B132067
    Disengage the 7 claws and 3 clips, and remove the front door scuff plate LH.


2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

  1. B132116E01
    Remove the cowl side trim clip.

  1. Disengage the 2 clips and remove the cowl side trim sub-assembly LH.


3. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

  1. B147264
    Remove the screw and the bolt.

  1. Disconnect the hood lock control cable assembly.

  1. Disengage the claw and the 4 clips.

  1. Disengage the 2 claws and disconnect the connector.

  1. Remove the air hose, disconnect the connector, and then remove the lower No. 1 instrument panel finish panel.


4. REMOVE STEERING COLUMN COVER

  1. E128001
    Turn the steering wheel assembly to the right and remove the screw as shown in the illustration.

  1. E128002
    Turn the steering wheel assembly to the left and remove the screw as shown in the illustration.

  1. E128003
    Disengage the 2 claws and remove the steering column cover lower.

  1. E136753
    Disengage the claw and remove the steering column cover upper.


5. REMOVE TRANSPONDER KEY AMPLIFIER

  1. C115569
    Using a screwdriver, widen the claws hanging onto the upper bracket by approximately 1.0 mm (0.039 in.).

  1. Pull out the transponder key amplifier with the claw open.

    NOTICE:
    Using excessive force may damage the case.

← COMPONENTS (from Jun 2006)REMOVAL (Oct 2006 – May 2009) →