2006-2011 Camry Aurion · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. INSTALL FRONT POWER SEAT LUMBAR SWITCH (for LHD)

  1. B146654
    Install the front power seat lumbar switch with the 2 screws.


2. INSTALL FRONT POWER SEAT LUMBAR SWITCH (for RHD)

  1. B165270
    Install the front power seat lumbar switch with the 2 screws.


3. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY (for LHD)

  1. B134673
    Connect the connector.

  1. Engage the 2 claws.

  1. Install the front seat cushion shield assembly with the 5 screws.

  1. B146651
    Install the 2 rubber bands on the backside of the front seatback board sub-assembly.


4. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY (for RHD)
  1. Connect the connector.

  1. B147698
    Engage the 2 claws.

  1. Install the front seat cushion shield assembly with the 5 screws.

  1. B146651
    Install the 2 rubber bands on the backside of the front seatback board sub-assembly.


5. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (for LHD)

  1. B149597
    Install the slide and vertical power seat switch knob.


6. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (for RHD)

  1. B147701
    Install the slide and vertical power seat switch knob.


7. INSTALL RECLINING POWER SEAT SWITCH KNOB (for LHD)

  1. B149596
    Install the reclining power seat switch knob.


8. INSTALL RECLINING POWER SEAT SWITCH KNOB (for RHD)

  1. B147702
    Install the reclining power seat switch knob.


9. INSTALL FRONT SEAT ASSEMBLY (for LHD)
  1. Place the seat in the cabin.

  1. Connect the connectors under the seat.

  1. Connect the cable to the negative (-) battery terminal.

  1. Move the front seat assembly to the rearmost position by operating the slide and vertical power seat switch knob.

  1. B149590
    Temporarily install the front side of the front seat assembly with the 2 bolts.

  1. Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.

  1. B139102
    Temporarily install the rear side of the front seat assembly with the 2 bolts.

  1. Move the front seat assembly to the rearmost position by operating the slide and vertical power seat switch knob.

  1. Fully tighten the 2 bolts on the front side of the front seat assembly in the order of the inner side bolt and then the outer side bolt.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

  1. Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.

  1. Fully tighten the 2 bolts on the rear side of the front seat assembly in the order of the inner side bolt and then the outer side bolt.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }


10. INSTALL FRONT SEAT ASSEMBLY (for RHD)
  1. Place the seat in the cabin.

  1. Connect the connectors under the seat.

  1. Connect the cable to the negative (-) battery terminal.

  1. Move the front seat assembly to the rearmost position by operating the slide and vertical power seat switch knob.

  1. B147683
    Temporarily install the front side of the front seat assembly with the 2 bolts.

  1. Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.

  1. B147684
    Temporarily install the rear side of the front seat assembly with the 2 bolts.

  1. Move the front seat assembly to the rearmost position by operating the slide and vertical power seat switch knob.

  1. Fully tighten the 2 bolts on the front side of the front seat assembly in the order of the inner side bolt and then the outer side bolt.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

  1. Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.

  1. Fully tighten the 2 bolts on the rear side of the front seat assembly in the order of the inner side bolt and then the outer side bolt.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }


11. INSTALL INNER SEAT TRACK BRACKET COVER (for LHD)

  1. B149588E01
    Slide the inner seat track bracket cover along the seat rail toward the front of the vehicle. Engage claw A to the seat rail.

  1. Push the inner seat track bracket cover to engage claw B.


12. INSTALL INNER SEAT TRACK BRACKET COVER (for RHD)
  1. Engage the 4 claws and install the front seat rear inner track bracket cover.


13. INSTALL OUTER SEAT TRACK BRACKET COVER (for LHD)

  1. B149587E01
    Slide the outer seat track bracket cover along the seat rail toward the front of the vehicle. Engage claw A to the seat rail.

  1. Push the seat track cover to engage claw B.


14. INSTALL OUTER SEAT TRACK BRACKET COVER (for RHD)

  1. B147713
    Engage the 4 claws and install the front seat rear outer track bracket cover.


15. INSTALL FRONT SEAT HEADREST ASSEMBLY (for LHD)

16. INSTALL FRONT SEAT HEADREST ASSEMBLY (for RHD)

17. INSPECT SRS WARNING LIGHT (w/ Airbag System)
Inspect the SRS warning light. (Click here)

18. INSPECT FRONT SEAT ASSEMBLY
← INSTALLATION (Oct 2006 – May 2009)COMPONENTS (from Jun 2006) →