REMOVAL
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1.
REMOVE FRONT DOOR SCUFF PLATE LH
|
 |
- Disengage the 7 claws and 3 clips, and remove the front door scuff plate LH.
| 2.
REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH
|
 |
- Remove the cowl side trim clip.
Disengage the 2 clips and remove the cowl side trim sub-assembly LH.
| 3.
REMOVE INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY (for 2AZ-FE RHD)
|
 |
- Disengage the 4 claws.
Disengage the 2 guides and remove the No. 2 under cover sub-assembly.
| 4.
REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for 2AZ-FE RHD)
|
 |
- Remove the bolt <A>.
Remove the 4 screws <B>.
Disengage the 3 claws and 3 clips, and then remove the lower instrument panel sub-assembly.
| 5.
REMOVE INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY (for 2GR-FE RHD)
|
 |
- Disengage the 4 claws.
Disengage the 2 guides and remove the No. 2 under cover sub-assembly.
| 6.
REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for 2GR-FE RHD)
|
 |
- Remove the bolt <D>.
Remove the screw <F> or <N>.
Remove the 3 screws <F>.
Disengage the 3 claws and the 3 clips, and then remove the lower instrument panel sub-assembly.
| 7.
REMOVE WINDSHIELD WIPER RELAY ASSEMBLY |
 |
- Disconnect the connector.
Remove the nut and the windshield wiper relay assembly.