INSTALLATION
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009
| 1.
INSTALL CIGARETTE LIGHTER ASSEMBLY |
 |
Install the 2 cigarette lighter bulbs.
Install the cigarette lighter bulb cap.
Connect the cigarette lighter bulb socket.
- Install the cigarette lighter socket.
Install the cigarette lighter retainer.
- Connect the cigarette lighter bulb socket.
- Engage the 2 claws and install the ash receptacle retainer sub-assembly.
- Turn the cigarette lighter nut in the direction indicated by the arrow to install it.
- Connect the connector.
Install the cigarette lighter knob and element assembly.
| 2.
INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY
|
 |
Connect each connector.
- Engage the 2 claws and 2 clips.
Install the lower instrument cluster finish panel center sub-assembly with the 2 screws <F>.
| 3.
INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle LHD)
|
 |
- Connect the connector.
Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.
| 4.
INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle RHD)
|
 |
- Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.
| 5.
INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle)
|
 |
- Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.
| 6.
INSTALL POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transaxle LHD)
|
 |
- Engage the 6 claws and the 3 clips to install the position indicator housing assembly.
| 7.
INSTALL POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transaxle RHD)
|
 |
- Engage the 2 claws and the 5 clips to install the position indicator housing assembly as shown in the illustration.
| 8.
INSTALL UPPER CONSOLE PANEL (for Manual Transaxle)
|
 |
- Engage the 2 claws and the 5 clips to install the upper console panel as shown in the illustration.
| 9.
INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
|
 |
- Engage the 2 clips and install the No. 1 instrument cluster finish panel garnish.
| 10.
INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
|
 |
- Engage the 2 clips and install the No. 2 instrument cluster finish panel garnish.
| 11.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle LHD)
|
 |
- Install the shift lever knob sub-assembly.
| 12.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle RHD)
|
 |
- Install the shift lever knob sub-assembly.
| 13.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
|
 |
- Install the shift lever knob sub-assembly.