INSTALLATION
Removal / installation · Vehicles built Jun 2006 – Sep 2006
| 1. INSTALL RADIO RECEIVER ASSEMBLY (w/ CD Player) |
Install the radio receiver assembly as shown in the illustration.

| 2. INSTALL RADIO NO. 2 BRACKET (w/ CD Player) |
Install the radio No. 2 bracket with the 3 bolts and 2 screws.

| 3. INSTALL RADIO NO. 1 BRACKET (w/ CD Player) |
Install the radio No. 1 bracket with the 3 bolts and 2 screws.

| 4. INSTALL RADIO RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY (w/ CD Player) |
Connect each connector.

Engage the 4 clips.
Install the radio receiver with heater control panel assembly with the 4 bolts.
| 5. INSTALL RADIO AND CASSETTE TAPE ASSEMBLY (w/o CD Player) |
| 6. INSTALL RADIO NO. 2 BRACKET (w/o CD Player) |
Install the radio No. 2 bracket and radio receiver panel with the 2 bolts and 3 screws.

| 7. INSTALL RADIO NO. 1 BRACKET (w/o CD Player) |
Install the radio No. 1 bracket and radio receiver panel with the 2 bolts and 3 screws.

| 8. INSTALL RADIO AND CASSETTE TAPE WITH HEATER CONTROL PANEL ASSEMBLY (w/o CD Player) |
Connect each connector.

Engage the 6 clips.
Install the radio and cassette tape with heater control panel assembly with the 4 bolts.
| 9. INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY |
Connect the connector.
Engage the 7 clips and install the instrument panel No. 2 register assembly.

| 10. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY |
Connect each connector.
Engage the 2 claws and 2 clips.

Install the lower instrument cluster finish panel center sub-assembly with the 2 screws <F>.
| 11. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle LHD) |
Connect the connector.

Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.
| 12. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle RHD) |
Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.

| 13. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle) |
Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.

| 14. INSTALL POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transaxle LHD) |
Engage the 6 claws and the 3 clips to install the position indicator housing assembly.

| 15. INSTALL POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transaxle RHD) |
Engage the 2 claws and the 5 clips to install the position indicator housing assembly as shown in the illustration.

| 16. INSTALL UPPER CONSOLE PANEL (for Manual Transaxle) |
Engage the 2 claws and the 5 clips to install the upper console panel as shown in the illustration.

| 17. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Engage the 2 clips and install the No. 2 instrument cluster finish panel garnish.

| 18. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Engage the 2 clips and install the No. 1 instrument cluster finish panel garnish.

| 19. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle LHD) |
Install the shift lever knob sub-assembly.

| 20. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle RHD) |
Install the shift lever knob sub-assembly.

| 21. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) |
Install the shift lever knob sub-assembly.

