2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built Oct 2006 – May 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. INSTALL RADIO RECEIVER ASSEMBLY (w/ CD Player)

  1. E129179
    Install the radio receiver assembly as shown in the illustration.


2. INSTALL RADIO NO. 2 BRACKET (w/ CD Player)

  1. E129177
    Install the radio No. 2 bracket with the 3 bolts and 2 screws.


3. INSTALL RADIO NO. 1 BRACKET (w/ CD Player)

  1. E129176
    Install the radio No. 1 bracket with the 3 bolts and 2 screws.


4. INSTALL RADIO RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY (w/ CD Player)

  1. E129175
    Connect each connector.

  1. Engage the 4 clips.

  1. Install the radio receiver with heater control panel assembly with the 4 bolts.


5. INSTALL RADIO AND CASSETTE TAPE ASSEMBLY (w/o CD Player)

6. INSTALL RADIO NO. 2 BRACKET (w/o CD Player)

  1. E135570
    Install the radio No. 2 bracket and radio receiver panel with the 2 bolts and 3 screws.


7. INSTALL RADIO NO. 1 BRACKET (w/o CD Player)

  1. E135569
    Install the radio No. 1 bracket and radio receiver panel with the 2 bolts and 3 screws.


8. INSTALL RADIO AND CASSETTE TAPE WITH HEATER CONTROL PANEL ASSEMBLY (w/o CD Player)

  1. E135568
    Connect each connector.

  1. Engage the 6 clips.

  1. Install the radio and cassette tape with heater control panel assembly with the 4 bolts.


9. INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY
  1. Connect the connector.

  1. B152785
    Engage the 7 clips and install the instrument panel No. 2 register assembly.


10. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY
  1. Connect each connector.

  1. B141243E01
    Engage the 2 claws and 2 clips.

  1. Install the lower instrument cluster finish panel center sub-assembly with the 2 screws <F>.


11. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle LHD)

  1. B149934
    Connect the connector.

  1. Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.


12. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle RHD)

  1. B144604
    Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.


13. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle)

  1. B144604
    Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.


14. INSTALL POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transaxle LHD)

  1. B148447
    Engage the 6 claws and the 3 clips to install the position indicator housing assembly.


15. INSTALL POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transaxle RHD)

  1. B152778
    Engage the 2 claws and the 5 clips to install the position indicator housing assembly as shown in the illustration.


16. INSTALL UPPER CONSOLE PANEL (for Manual Transaxle)

  1. B145877
    Engage the 2 claws and the 5 clips to install the upper console panel as shown in the illustration.


17. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  1. B144599
    Engage the 2 clips and install the No. 2 instrument cluster finish panel garnish.


18. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  1. B144605
    Engage the 2 clips and install the No. 1 instrument cluster finish panel garnish.


19. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle LHD)

  1. B148448
    Install the shift lever knob sub-assembly.


20. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle RHD)

  1. B152780
    Install the shift lever knob sub-assembly.


21. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

  1. B152775
    Install the shift lever knob sub-assembly.

← REMOVAL (from Jun 2009)INSTALLATION (from Jun 2009) →