2006-2011 Camry Aurion · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (for LHD)

  1. B159330
    Disengage the 2 claws and 2 clips, and then remove the lower instrument panel finish panel.

  1. Disconnect the connector.


2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (for RHD)

  1. B158918
    Disengage the 2 claws and 2 clips, and then remove the lower instrument panel finish panel.

  1. Disconnect the connector.


3. REMOVE ENGINE SWITCH

  1. A131544E01
    Detach the 2 claws and remove the engine switch from the finish panel.

← REMOVAL (Oct 2006 – May 2009)INSPECTION (from Oct 2006) →