INSTALLATION
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1.
INSTALL CONSOLE BOX ASSEMBLY |
 |
- Engage the 2 claws.
- Install the 2 bolts.
- Install the 3 screws.
- Install the console box assembly with the 3 screws.
- Engage the clamp.
| 2.
INSTALL CONSOLE BOX CARPET |
 |
- Install the console box carpet.
| 3.
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
|
 |
Connect the connector.
- Engage the 10 claws and install the upper console panel sub-assembly.
| 4.
INSTALL UPPER CONSOLE PANEL FRONT GARNISH
|
 |
- Connect each connector.
Engage the 6 claws and install the upper console panel front garnish.
| 5.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
|
 |
- Install the shift lever knob sub-assembly.
| 6.
INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
|
 |
- Engage the 3 claws and 3 clips.
Install the screw <F> or <N>.
Install the 3 screws <F>.
Install the lower instrument panel sub-assembly with the bolt <D>.
| 7.
INSTALL INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY
|
 |
- Engage the 4 claws and 2 guides and install the instrument panel No. 2 under cover sub-assembly.
| 8.
INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
|
 |
- HINT:
- Use the same procedure for the RH side and the LH side.
| 9.
INSTALL FRONT DOOR SCUFF PLATE RH
|
 |
- HINT:
- Use the same procedure for the RH side and the LH side.
| 10.
INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
|
 |
- Install the air hose and connect each connector.
Engage the claw and the 4 clips.
Engage the 2 claws and the DLC3.
Install the lower No. 1 instrument panel finish panel with the screw <F> and bolt <D>.
| 11.
INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
|
 |
- Engage the 2 clips.
Install the cowl side trim sub-assembly LH with the cowl side trim clip.
| 12.
INSTALL FRONT DOOR SCUFF PLATE LH
|
 |
- Engage the 7 claws and 3 clips, then install the front door scuff plate LH.