2006-2011 Camry Aurion · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jun 2009


INSPECT NO. 2 IGNITION RELAY

  1. E034090E19
    Using an ohmmeter, measure the resistance between each terminal.

    Standard Resistance:
    Tester Connection
    Specified Condition
    3 - 5
    10 kΩ or higher
    Below 1 Ω (When battery voltage is applied to terminals 1 and 2)

    If the result is not as specified, replace the No. 2 ignition relay.

← ON-VEHICLE INSPECTION (from Jun 2009)COMPONENTS (from Jun 2009) →