INSTALLATION
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1.
INSTALL ROOM TEMPERATURE SENSOR |
 |
- Engage the claw to install the sensor.
Connect the connector and attach the air hose.
| 2.
INSTALL LOWER NO.1 INSTRUMENT PANEL FINISH PANEL
|
 |
- Install the air hose and connect the connector.
Engage the 2 claws and the DLC3.
Engage the claw and the 4 clips.
Install the lower No. 1 instrument panel finish panel with the screw <B> and bolt <A>.
| 3.
INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
|
 |
- Engage the 2 clips.
Install the cowl side trim sub-assembly LH with the cowl side trim clip.
| 4.
INSTALL FRONT DOOR SCUFF PLATE LH
|
 |
- Engage the 7 claws and 3 clips, then install the front door scuff plate LH.