REMOVAL
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1. REMOVE FRONT DOOR SCUFF PLATE RH |
- HINT:
- Use the same procedure for the RH side and the LH side (Click here).
| 2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH |
- HINT:
- Use the same procedure for the RH side and the LH side (Click here).
| 3. REMOVE LOWER NO.1 INSTRUMENT PANEL FINISH PANEL |
Remove the bolt <D> and the screw <F>.

Disengage the 2 claws and the DLC3.
Disconnect the hood lock control cable assembly.
Disengage the claw and the 4 clips.
Remove the air hose, disconnect each connector, and then remove the lower No. 1 instrument panel finish panel.
| 4. REMOVE ROOM TEMPERATURE SENSOR |
Disconnect the connector and air hose.

Release the claw and remove the sensor.
