DISASSEMBLY
Removal / installation · Vehicles built from Oct 2006
| 1. REMOVE FRONT DIFFERENTIAL RING GEAR |
Put matchmarks on the front differential ring gear and differential case.

Remove the 12 bolts.

Using a plastic hammer, tap on the front differential ring gear to remove it from the case.

| 2. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING |
Using SST, remove the front differential case front tapered roller bearing from the differential case.

- SST
- 09950-00020
09950-00030
09950-60010 (09951-00480)
Using SST, remove the front differential case front tapered roller bearing outer race and shim from the transaxle housing.

- SST
- 09308-00010
| 3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING |
Using SST, remove the front differential case rear tapered roller bearing from the differential case.

- SST
- 09950-00020
09950-00030
09950-60010 (09951-00480)
Using SST, remove the front differential case rear tapered roller bearing outer race from the transaxle case.

- SST
- 09308-00010
| 4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN |
Using a pin punch (3 mm) and hammer, remove the straight pin.

- NOTICE:
- Before removing the straight pin, unstake it with a pin punch.
| 5. REMOVE FRONT NO. 1 DIFFERENTIAL PINION SHAFT |
Remove the front No. 1 differential pinion shaft from the differential case.

| 6. REMOVE DIFFERENTIAL SIDE GEAR |
Remove the 2 front differential pinions, 2 pinion thrust washers, 2 front differential side gears, and 2 side gear thrust washers from the differential case.

| 7. REMOVE FRONT TRANSAXLE CASE OIL SEAL |
Using SST and a hammer, remove the front transaxle case oil seal from the transaxle housing.

- SST
- 09950-60010
(09951-00540)
09950-70010 (09951-07200)
| 8. REMOVE TRANSAXLE CASE OIL SEAL |
Using SST and a hammer, remove the transaxle case oil seal from the transaxle case.

- SST
- 09950-60010
(09951-00650)
09950-70010 (09951-07100)
