Diagnostic trouble codes · Vehicles built Jun 2006 – Sep 2006
Also covers:
B2344 Position Failure
Versions by build date: Jun 2006 – Sep 2006from Oct 2006
DESCRIPTION
When the sliding roof drive gear sub-assembly (sliding roof control ECU) detects malfunctions in the motor, and the sliding roof operation is stopped, DTC B2341 is output. When the sliding roof drive gear sub-assembly (sliding roof control ECU) detects malfunctions in the gear, and the sliding roof operation is stopped, DTC B2344 is output.
DTC No.
DTC Detection Condition
Trouble Area
B2341
Sensor (motor) Failure
Sliding roof drive gear sub-assembly (sliding roof control ECU)
Roof console box assembly (sliding roof control switch)
Wire harness
B2344
Position Failure
Sliding roof drive gear sub-assembly (sliding roof control ECU)
Roof console box assembly (sliding roof control switch)
Wire harness
WIRING DIAGRAM
INSPECTION PROCEDURE
1. CHECK SLIDING ROOF FUNCTION
Check the auto operation with the OPEN, DOWN, CLOSE, and UP switches (Click here).
OK:
Auto operation operates normally with OPEN, DOWN, CLOSE, and UP switches.