Remove the No. 2 headlight bulb as shown in the illustration.
2.
REMOVE NO. 1 HEADLIGHT BULB
Disconnect the headlight socket cover.
Remove the No. 1 headlight bulb and headlight bulb socket as shown in the illustration.
Disconnect the connector.
Remove the No. 1 headlight bulb from the headlight bulb socket.
3.
REMOVE FRONT TURN SIGNAL LIGHT BULB
Turn the front turn signal light bulb and front turn signal light socket in the direction indicated by the arrow shown in the illustration and remove them as a unit.
Remove the front turn signal light bulb from the front turn signal light socket.
4.
REMOVE CLEARANCE LIGHT BULB
Turn the clearance light bulb and clearance light socket in the direction indicated by the arrow shown in the illustration and remove them as a unit.
Remove the clearance light bulb from the clearance light socket.
5.
REMOVE HEADLIGHT LEVELING MOTOR (w/ Headlight Leveling)
Align the notches of the headlight leveling motor and housing, and pull out the headlight leveling motor slightly.
Lower the tip of the headlight leveling motor to disengage it from the reflector and remove the headlight leveling motor.
6.
REMOVE HEADLIGHT LEVELING MOTOR BASE PACKING (w/ Headlight Leveling)
Remove the headlight leveling motor base packing.
NOTICE:
After the headlight leveling motor base packing is removed, be sure to replace it with a new one. Failure to do this may cause water ingress.