INSTALLATION
Removal / installation · Vehicles built Jun 2006 – Sep 2006
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1.
INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY
|
 |
- Engage the 2 claws and install the rear power window regulator switch assembly.
| 2.
INSTALL REAR DOOR INNER GLASS WEATHERSTRIP
|
 |
- Engage the 3 claws to install the rear door inner glass weatherstrip.
| 3.
INSTALL REAR DOOR INSIDE HANDLE SUB-ASSEMBLY
|
 |
- Connect the rear door lock remote control cable and rear door inside locking cable to the rear door inside handle.
- Engage the 2 claws and install the rear door inside handle sub-assembly.
| 4.
INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY
|
 |
- Engage the claw to install the No. 1 door scuff plate clamp.
Connect each connector.
- Engage the rear door trim board with the 4 clips of the rear door inner glass weatherstrip.
- Engage the 7 clips to install the rear door trim board to the rear door panel.
Install the 3 screws.
| 5.
INSTALL REAR ASH RECEPTACLE ASSEMBLY (w/ Ashtray)
|
 |
- Install the rear ash receptacle assembly.
| 6.
INSTALL DOOR ASSIST GRIP COVER
|
 |
- Engage the 6 claws and install the door assist grip cover.
| 7.
INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG
|
 |
- Engage the 3 claws to install the rear door inside handle bezel plug.
| 8.
INITIALIZE POWER WINDOW CONTROL SYSTEM |
 |
(Click here)