2006-2011 Camry Aurion · Service Manual
HEATER & AIR CONDITIONING SYSTEM
Home
›
HEATER & AIR CONDITIONING SYSTEM
› AIR CONDITIONING › COMPRESSOR AND PULLEY (for 2AZ-FE)
INSPECTION
Inspection
·
Vehicles built from Jun 2006
INSPECT COMPRESSOR AND PULLEY (A/C COMPRESSOR SOLENOID)
Measure the resistance according to the value(s) in the table below.
Standard resistance:
Tester Connection
Condition
Specified Condition
2 - 1
20°C (68°F)
10 to 11 Ω
If the resistance is not as specified, replace the compressor and pulley.
← REMOVAL (from Jun 2009)
INSTALLATION (Jun 2006 – Sep 2006) →