2006-2011 Camry Aurion · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built from Oct 2006


INSPECT ATF TEMPERATURE SENSOR ASSEMBLY

  1. C133224
    Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Specified Condition
    E2 - THO1
    90 Ω to 156 kΩ
    E2 - Body ground
    10 kΩ or higher
    THO1 - Body ground
    10 kΩ or higher

    HINT:
    If the resistance is out of the specified range with the ATF temperature shown in the table below, the driveability of the vehicle may decrease.

    Standard resistance:
    ATF Temperature
    Specified Condition
    10°C (50°F)
    5.8 to 7.1 kΩ
    110°C (230°F)
    0.22 to 0.28 kΩ

    If the result is not as specified, replace the ATF temperature sensor assembly.

← REMOVAL (from Jun 2009)INSTALLATION (Oct 2006 – May 2009) →