INSTALLATION
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY |
Install the bulb holder.
Using a "TORX" driver (T20), install the side turn signal light assembly with the 3 "TORX" screws.

| 2. INSTALL OUTER MIRROR COVER |
Engage the 5 claws to install the outer mirror cover.

| 3. INSTALL OUTER REAR VIEW MIRROR GLASS |
Place a new outer rear view mirror glass over the motor plate. Ensure that the spring wire is positioned correctly in the guide track on the motor plate.
Cover the mirror glass with a piece of cloth and apply even pressure to engage the glass with the motor plate.
Adjust the mirror manually to check that the spring wire is correctly positioned. There should be a clicking sound during manual adjustment.
Check that the mirror can be adjusted using the outer mirror switch.
Adjust the mirror to the desired position.
