REMOVAL
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1.
REMOVE OUTER REAR VIEW MIRROR GLASS
|
 |
- Adjust the mirror glass to the fully inboard and upward position.
- Insert a screwdriver with the tip taped between the mirror housing and the mirror glass as shown in the illustration.
- NOTICE:
- The screwdriver should be securely wedged up against the back of the mirror glass.
- Twist the screwdriver to separate the mirror glass from the motor plate.
| 2.
REMOVE OUTER MIRROR COVER
|
 |
- Disengage the 5 claws and remove the outer mirror cover.
| 3.
REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY |
 |
- Using a "TORX" driver (T20), remove the 3 "TORX" screws.
Pull out the bulb holder and remove the side turn signal light assembly.