2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. REMOVE REAR BUMPER UPPER SIDE RETAINER

  1. E192215
    Disengage the claw and remove the rear bumper upper side retainer.


2. REMOVE REAR TURN SIGNAL LIGHT BULB

  1. E192212
    Turn the rear turn signal light bulb and rear turn signal light socket in the direction indicated by the arrow shown in the illustration and disconnect them as a unit.

  1. Remove the rear turn signal light bulb from the rear turn signal light socket.


3. REMOVE REAR COMBINATION LIGHT GASKET

  1. E192214
    Remove the rear combination light gasket.

    NOTICE:
    1. Be sure to remove all traces of the old gasket from the body.
    2. Do not reuse the removed gasket. Be sure to install a new rear combination light gasket to prevent water ingress.


4. REMOVE BACK UP LIGHT BULB

  1. E192217
    Turn the back up light bulb and the rear light socket and wire in the direction indicated by the arrow shown in the illustration and disconnect them as a unit.

  1. Remove the back up light bulb from the rear light socket and wire.


5. REMOVE REAR FOG LIGHT BULB

  1. E192219
    Turn the rear fog light bulb and the rear light socket and wire in the direction indicated by the arrow shown in the illustration and disconnect them as a unit.

  1. Remove the rear fog light bulb from the rear light socket and wire.


6. REMOVE REAR LIGHT SOCKET AND WIRE

  1. E192221
    Disconnect the connector and remove the rear light socket and wire.


7. REMOVE REAR LIGHT GASKET

  1. E192222
    Remove the rear light gasket.

    NOTICE:
    1. Be sure to remove all traces of the old gasket from the body.
    2. Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.

← DISASSEMBLY (Oct 2006 – May 2009)REASSEMBLY (Oct 2006 – May 2009) →