REMOVAL
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1.
REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY
|
 |
- Apply protective tape to the areas shown in the illustration.
- Using a moulding remover, disengage the 6 claws as shown in the illustration.
- Using a moulding remover, disengage the 5 claws as shown in the illustration.
Disconnect each connector and remove the instrument panel No. 2 register assembly.
| 2.
REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY |
 |
- Disengage the 4 claws and remove the hazard warning signal switch assembly.