REASSEMBLY
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1.
INSTALL FRONT BUMPER SIDE RETAINER LH |
 |
- Engage the 2 claws and install the front bumper side retainer LH.
Install the screw.
| 2.
INSTALL FRONT BUMPER SIDE RETAINER RH |
 |
- HINT:
- Use the same procedure for the RH side and LH side.
| 3.
INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY |
 |
- Install the front bumper reinforcement sub-assembly with the 6 bolts.
- Engage each clamp.
| 4.
INSTALL FRONT BUMPER ENERGY ABSORBER |
 |
- Install the front bumper energy absorber to the front bumper reinforcement sub-assembly.
| 5.
INSTALL RADIATOR GRILLE EMBLEM |
 |
- HINT:
- When installing the emblem, heat the radiator grille and emblem using a heat light.
- Heating temperature:
Item
|
Temperature
|
Radiator Grille
|
20 to 30°C (68 to 86°F)
|
Emblem
|
20 to 30°C (68 to 86°F)
|
- NOTICE:
- Do not heat the radiator grille and emblem excessively.
Clean the radiator grille surface.
Using a heat light, heat the radiator grille surface.
Remove the double-sided tape from the radiator grille.
Wipe off any tape adhesive residue with cleaner.
Clean the emblem. (If reusing the emblem)
Using a heat light, heat the emblem.
Remove the double-sided tape from the emblem.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the emblem.
- Install the emblem.
Using a heat light, heat the radiator grille and emblem.
Remove the release paper from the emblem.
- HINT:
- After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the emblem.
| 6.
INSTALL RADIATOR GRILLE |
 |
- Engage the 8 claws and install the radiator grille.
| 7.
INSTALL LOWER RADIATOR GRILLE |
 |
- Engage the 14 claws and install the lower radiator grille.
| 8.
INSTALL FRONT BUMPER SIDE MOULDING LH (w/o Front Spoiler) |
 |
- Engage the 3 claws and install the front bumper side moulding LH.
Install the screw.
| 9.
INSTALL FRONT BUMPER SIDE MOULDING RH (w/o Front Spoiler) |
 |
- HINT:
- Use the same procedure for the RH side and LH side.
| 10.
INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light) |
 |
- Engage the 5 claws and install the front bumper hole cover LH.
| 11.
INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light) |
 |
- HINT:
- Use the same procedure for the RH side and LH side.
| 12.
INSTALL FRONT BUMPER HOLE COVER LH (w/ Fog Light) |
 |
- Engage the 5 claws and install the front bumper hole cover LH.
| 13.
INSTALL FRONT BUMPER HOLE COVER RH (w/ Fog Light) |
 |
- HINT:
- Use the same procedure for the RH side and LH side.
| 14.
INSTALL FOG LIGHT ASSEMBLY LH
|
 |
- Install the fog light assembly with the screw.
| 15.
INSTALL FOG LIGHT ASSEMBLY RH |
 |
- HINT:
- Use the same procedure for the RH side and LH side.
| 16.
INSTALL FRONT BUMPER LOWER COVER |
 |
- Engage the 2 claws and install the front bumper lower cover.
| 17.
INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET |
 |
- Engage the 2 claws and install the front bumper extension mounting bracket.
Install the 2 screws.
| 18.
INSTALL FRONT BUMPER EXTENSION LH (w/ Front Spoiler) |
 |
- Install the front bumper extension LH with the 2 nuts.
| 19.
INSTALL FRONT BUMPER EXTENSION RH (w/ Front Spoiler) |
 |
- HINT:
- Use the same procedure for the RH side and LH side.
| 20.
INSTALL FRONT SPOILER COVER |
 |
Engage the 17 claws and install the front spoiler cover.


Install the 25 clips and 2 screws.
| 21.
INSTALL HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System) |
 |
Engage the 5 clips and install the headlight cleaner hose.


| 22.
INSTALL HEADLIGHT CLEANER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)
|
 |
- Engage the 2 claws.
- Install the headlight cleaner actuator sub-assembly with the bolt.
Connect the headlight cleaner hose.
| 23.
INSTALL HEADLIGHT CLEANER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System) |
 |
- HINT:
- Use the same procedure for the RH side and LH side.
| 24.
INSTALL HEADLIGHT CLEANER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System)
|
 |
- Engage the 2 claws and install the headlight cleaner nozzle sub-assembly.
| 25.
INSTALL HEADLIGHT CLEANER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System) |
 |
- HINT:
- Use the same procedure for the RH side and LH side.
| 26.
INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ Clearance Sonar System)
|
 |
- Install the No. 1 ultrasonic sensor retainer to the front bumper.
- NOTICE:
- Do not damage the bumper with the snap when installing the retainer.
- HINT:
- When installing the retainer, align the keyhole and snap as shown in the illustration.
| 27.
INSTALL NO. 1 ULTRASONIC SENSOR (w/ Clearance Sonar System)
|
 |
- Engage the 2 claws and install the No. 1 ultrasonic sensor.
Connect the sensor connector.