2006-2011 Camry Aurion · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – May 2009 from Jun 2009

HINT:
  1. Use the same procedure for the LH side and RH side.
  2. The procedures listed below are for the LH side.


1. REMOVE FRONT WHEEL

2. DRAIN BRAKE FLUID

3. REMOVE FRONT BRAKE FLEXIBLE HOSE

  1. C143456E01
    Using SST, disconnect the brake line while holding the front brake flexible hose with a wrench.
    SST
    09023-00101  

    NOTICE:
    1. Do not bend or damage the brake line.
    2. Do not allow any foreign matter such as dirt and dust to enter the brake line from the connecting points.

  1. Remove the clip.

  1. Remove the bolt, and separate the front brake flexible hose and the speed sensor from the shock absorber.

  1. Remove the union bolt, the front brake flexible hose and 2 gaskets.

← REMOVAL (Jun 2006 – May 2009)INSTALLATION (Jun 2006 – Sep 2006) →