REMOVAL
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
- HINT:
- Use the same procedure for the LH side and RH side.
- The procedures listed below are for the LH side.
| 3.
REMOVE REAR BRAKE FLEXIBLE HOSE |
 |
- Remove the union bolt, the rear brake flexible hose and 2 gaskets.
- Remove the bolt and separate the rear brake flexible hose.
- Using SST, disconnect the brake line while holding the rear brake flexible hose with a wrench.
- SST
- 09023-00101
- NOTICE:
- Do not bend or damage the brake line.
- Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting points.
Remove the clip.