2006-2011 Camry Aurion · Service Manual SERVICE SPECIFICATIONS

SERVICE DATA

Specifications · Vehicles built from Oct 2006

Throttle body


Standard throttle valve opening percentage
60% or more
Camshaft timing oil control valve assembly

Resistance
at 20°C (68°F)
6.9 to 7.9 Ω
Crankshaft position sensor


-10 to 50 °C (14 to 122 °F)
1,630 to 2,740 Ω

50 to 100 °C (122 to 212 °F)
2,065 to 3,225 Ω
Throttle body

Resistance
at 20°C (68°F)

2 (M+) - 1 (M-)
0.3 to 100 kΩ
5 (VC) - 3 (E2)
1.2 to 3.2 kΩ
E.F.I. engine coolant temperature sensor

Resistance
Approx. 20°C (68°F)
2.32 to 2.59 kΩ
Approx. 80°C (176°F)
0.310 to 0.326 kΩ
Knock sensor

Resistance
at 20°C (68°F)
120 to 280 kΩ
Circuit opening relay (engine room R/B Unit D)

Specified condition
1E-8 - 1E-12
Below 1 Ω
1E-7 - 1E-13
10 kΩ or higher
1E-7 - 1E-13
Below 1 Ω (when battery voltage is applied to terminals 1G-5 and 1H-9)
EFI relay (engine room R/B Unit D)

Specified condition
1E-9 - 1E-10
Below 1 Ω
1E-7 - 1E-12
10 kΩ or higher
1E-7 - 1E-12
Below 1 Ω (when battery voltage is applied to terminals 1H-10 and 1H-2)
A/F relay (engine room R/B Unit D)

Specified condition
1E-7 - 1E-10
Below 1 Ω
1A-3 - 1A-4
10 kΩ or higher
1A-3 - 1A-4
Below 1 Ω (when battery voltage is applied to terminals 1D-5 and 1H-2)
IG2 Relay

Standard resistance
3 - 5
10 kΩ or higher
3 - 5
Below 1 Ω (Battery voltage applied between terminals 1 and 2)
Acceleration pedal rod

Standard voltage (ACCEL POS #1)
Released
0.5 to 1.1 V
Depressed
2.5 to 4.5 V
Standard voltage (ACCEL POS #2)
Released
1.2 to 2.0 V
Depressed
3.4 to 5.0 V
← TORQUE SPECIFICATIONS (from Jun 2006)TORQUE SPECIFICATIONS (from Oct 2006) →