TORQUE SPECIFICATIONS
Specifications · Vehicles built from Jun 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
| Bearing retainer plate x Generator drive end frame |
2.3 |
23 |
20 in.*lbf |
| Generator coil assembly x Generator drive end frame |
5.8 |
59 |
51 in.*lbf |
| Generator brush holder assembly x Generator coil assembly |
1.8 |
18 |
16 in.*lbf |
| Generator rear end cover x Generator coil assembly |
4.6 |
47 |
41 in.*lbf |
| Clutch pulley x Generator rotor assembly ( ): For use with SST |
80 (58) |
816 (591) |
59 (43) |
| Generator assembly x Generator bracket |
20 |
204 |
15 |
| Cylinder block x Generator bracket |
20 |
204 |
15 |
| Generator assembly x wire harness clamp stay |
8.4 |
86 |
74 in.*lbf |
| Generator assembly x Cylinder block |
43 |
438 |
32 |
| Generator wire x Terminal B |
9.8 |
100 |
87 in.*lbf |