TORQUE SPECIFICATIONS
Specifications · Vehicles built Jun 2006 – May 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
| Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
| Bearing retainer plate x Generator drive end frame |
2.3 |
23 |
20 in.*lbf |
| Generator coil assembly x Generator drive end frame |
5.8 |
59 |
51 in.*lbf |
| Generator brush holder assembly x Generator coil assembly |
1.8 |
18 |
16 in.*lbf |
| Generator rear end cover x Generator coil assembly |
4.6 |
47 |
41 in.*lbf |
| Generator pulley x Generator rotor assembly |
111 |
1,130 |
82 |
| Generator assembly x Cord clip |
4.6 |
47 |
41 in.*lbf |
| Generator assembly x Wire harness bracket |
8.4 |
86 |
74 in.*lbf |
| Bolt A: Generator assembly x Cylinder block |
21 |
215 |
16 |
| Bolt B: Generator assembly x Cylinder block |
52 |
530 |
38 |
| Generator wire x Terminal B |
9.8 |
100 |
87 in.*lbf |