2006-2011 Camry Aurion · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Oct 2006


INSPECT IGNITION OR STARTER SWITCH ASSEMBLY

  1. A127596E01
    Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Condition
      Tester Connection
      Specified Condition
      LOCK
      Between all terminals
      10 kΩ or higher
      ACC
      2 - 4
      Below 1 Ω
      ON
      1 - 2 - 4
      Below 1 Ω
      5 - 6
      Below 1 Ω
      START
      1 - 3 - 4
      Below 1 Ω
      5 - 6 - 7
      Below 1 Ω

      If the result is not as specified, replace the ignition or starter switch.

← INSTALLATION (from Jun 2009)PRECAUTION (Jun 2006 – May 2009) →