HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
- HINT:
- Use these procedures to troubleshoot the LIN communication system.
- The intelligent tester should be used in steps 4, 5 and 6.
- Use these procedures to troubleshoot the LIN communication system.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.CUSTOMER PROBLEM ANALYSIS |
- HINT:
- In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
- Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
- The following 5 items are important points in the problem analysis:
- In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
What
Vehicle model, system name
When
Date, time, occurrence frequency
Where
Road conditions
Under what conditions?
Driving conditions, weather conditions
How did it happen?
Problem symptoms
| |||||
| 3.INSPECT BATTERY VOLTAGE |
- Standard voltage:
- 11 to 14 V
- HINT:
- If the voltage is below 11 V, recharge or replace the battery before proceeding.
| |||||
| 4.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM* |
Using the intelligent tester, inspect the CAN communication function to ensure there are no malfunctions in the communication system.
- Result:
Result
Proceed to
No DTCs output
A
DTCs output
(for LHD with Smart Entry and Start System)
B
DTCs output
(for LHD without Smart Entry and Start System)
C
DTCs output
(for RHD with Smart Entry and Start System)
D
DTCs output
(for RHD without Smart Entry and Start System)
E
|
|||||
|
|||||
|
|||||
|
|||||
| |||||
| 5.INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM* |
Using the intelligent tester , inspect the LIN communication function to ensure there are no malfunctions in the communication system (Click here).
- Result:
Result
Proceed to
No DTCs output (LIN communication error does not occur.)
A
DTCs output
B
|
|||||
| |||||
| 6.OVERALL ANALYSIS AND TROUBLESHOOTING* |
DATA LIST/ACTIVE TEST (Click here)
TERMINALS OF ECU (Click here)
| |||||
| 7.ADJUST, REPAIR OR REPLACE |
| |||||
| 8.CONFIRMATION TEST |
| |||||