REMOVAL
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1. PLACE MAYDAY ECU IN SERVICE MODE |
Using the diagnostic tool, place the mayday ECU into Service mode, refer to TDT System Functions (Click here).
| 2. DISCONNECT BATTERY |
Disconnect the negative battery cable from the battery.
| 3. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade) |
- HINT:
- Follow the steps for removing the package tray trim panel assembly (Click here).
| 4. REMOVE GSM ANTENNA |
Disconnect the GSM antenna connector.
Remove the 2 bolts.
Remove the GSM antenna.
