REMOVAL
Removal / installation · Vehicles built from Jun 2009
| 1. REMOVE FRONT DOOR SCUFF PLATE LH |
Disengage the 7 claws and 3 clips, and remove the front door scuff plate LH.

| 2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH |
Remove the cowl side trim clip.

Disengage the 2 clips and remove the cowl side trim sub-assembly LH.
| 3. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL |
Remove the bolt <A> and the screw <B>.

Disengage the 2 claws and the DLC3.
Disconnect the hood lock control cable assembly.
Disengage the claw and the 4 clips.
Remove the air hose, disconnect the connector, and then remove the lower No. 1 instrument panel finish panel.
| 4. REMOVE STOP LIGHT CONTROL RELAY |
Disengage the clamp and remove the stop light control relay.

Disconnect the connector.
