REMOVAL
Removal / installation · Vehicles built from Jun 2009
| 1. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY (for 2AZ-FE) |
- HINT:
- Refer to the procedure up to Remove Instrument Panel Safety Pad Assembly (Click here).
| 2. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY (for 2GR-FE) |
- HINT:
- Refer to the procedure up to Remove Instrument Panel Safety Pad Assembly (Click here).
| 3. REMOVE STOP LIGHT CONTROL RELAY |
Disengage the clamp.

Disconnect the connector and remove the stop light control relay.
