1.Check that the battery cables are connected to the correct terminals.
2.Disconnect the battery cables when the battery is given a quick charge.
3.Do not perform tests with a high voltage insulation resistance tester.
4.Never disconnect the battery while the engine is running.
5.Check that the charging cable nut is tightened on terminal B of the generator and the engine room R/B.
6.Do not place hands or clothing near the drive belts while the engine is running.
7.Expressions of ignition switch
The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.