2007 Aurion TRD · Service Manual Exterior

Name Plate

Exterior

COMPONENTS
REMOVAL
HINT:
When removing the name plate, heat the vehicle body and name plate using a heat light.
Heating temperature
Item
Temperature
Vehicle Body
40 to 60˚C (104 to 140˚F)
Name Plate
20 to 30˚C (68 to 86˚F)
NOTICE:
Do not heat the vehicle body and name plate excessively.
1. REMOVE LUGGAGE COMPARTMENT DOOR EMBLEM
(a) Put protective tape around the emblem.
-
(b) Insert a piano wire between the vehicle body and emblem.
-
(c) Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
-
(d) Pull the piano wire and scrape off the double-sided tape that holds the emblem to the vehicle body.
NOTICE:
• If reusing the emblem, take care not to damage the emblem or cut the location pins.
• Be careful not to damage the vehicle body.
-
(e) Remove the emblem.
-
2. REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
(a) Put protective tape around the name plate.
-
(b) Insert a piano wire between the vehicle body and name plate.
-
(c) Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
-
(d) Pull the piano wire and scrape off the double-sided tape that holds the name plate to the vehicle body.
NOTICE:
• If reusing the name plate, take care not to damage the name plate.
• Be careful not to damage the vehicle body.
-
(e) Remove the name plate.
-
3. REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR PLATE
(a) Put protective tape around the plate.
-
(b) Insert a piano wire between the vehicle body and plate.
-
(c) Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
-
(d) Pull the piano wire and scrape off the double-sided tape that holds the plate to the vehicle body.
NOTICE:
• If reusing the plate, take care not to damage the plate.
• Be careful not to damage the vehicle body.
-
(e) Remove the plate.
-
4. REMOVE FRONT DOOR NAME PLATE
(a) Put protective tape around the plate.
-
(b) Insert a piano wire between the vehicle body and plate.
-
(c) Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
-
(d) Pull the piano wire and scrape off the double-sided tape that holds the plate to the vehicle body.
NOTICE:
• If reusing the plate, take care not to damage the plate.
• Be careful not to damage the vehicle body.
-
(e) Remove the plate.
-
INSTALLATION
HINT:
When installing the name plate, heat the vehicle body and name plate using a heat light.
Heating temperature
Item
Temperature
Vehicle Body
40 to 60˚C (104 to 140˚F)
Name Plate
20 to 30˚C (68 to 86˚F)
NOTICE:
Do not heat the vehicle body and name plate excessively.
1. INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
-
(b) Clean the emblem. (If reusing the emblem)
(1) Using a heat light, heat the emblem.
(2) Remove the double-sided tape from the emblem.
(3) Wipe off any tape adhesive residue with cleaner.
(4) Apply new double-sided tape to the emblem.
-
(c) Install the emblem.
(1) Using a heat light, heat the vehicle body and emblem.
(2) Remove the release paper from the emblem.
HINT:
After removing the release paper, keep the exposed adhesive free from foreign matter.
(3) Install the emblem.


-
2. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
-
(b) Clean the plate. (If reusing the plate)
(1) Using a heat light, heat the plate.
(2) Remove the double-sided tape from the plate.
(3) Wipe off any tape adhesive residue with cleaner.
(4) Apply new double-sided tape to the plate.
-
(c) Install the plate.
(1) Using a heat light, heat the vehicle body and plate.
(2) Remove the release paper from the plate.
HINT:
After removing the release paper, keep the exposed adhesive free from foreign matter.
(3) Install the plate.


Reference measurement
Area
Measurement
A
51.2 mm (2.01 in.)
B
52.9 mm (2.08 in.)
C
78.7 mm (3.10 in.)
D
195.3 mm (7.69 in.)
-
3. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
-
(b) Clean the name plate. (If reusing the name plate)
(1) Using a heat light, heat the name plate.
(2) Remove the double-sided tape from the name plate.
(3) Wipe off any tape adhesive residue with cleaner.
(4) Apply new double-sided tape to the name plate.
-
(c) Install the name plate.
(1) Using a heat light, heat the vehicle body and name plate.
(2) Remove the release paper from the name plate.
HINT:
After removing the release paper, keep the exposed adhesive free from foreign matter.
(3) Install the name plate.


Reference measurement
Area
Measurement
A
50.1 mm (1.97 in.)
B
52.3 mm (2.06 in.)
C
74.7 mm (2.94 in.)
D
211.4 mm (8.32 in.)
-
4. INSTALL FRONT DOOR NAME PLATE
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
-
(b) Clean the name plate. (If reusing the name plate)
(1) Using a heat light, heat the name plate.
(2) Remove the double-sided tape from the name plate.
(3) Wipe off any tape adhesive residue with cleaner.
(4) Apply new double-sided tape to the name plate.
-
(c) Install the name plate.
(1) Using a heat light, heat the vehicle body and name plate.
(2) Remove the release paper from the name plate.
HINT:
After removing the release paper, keep the exposed adhesive free from foreign matter.
(3) Install the name plate.
for 3500 S plate LH side:


Reference measurement
Area
Measurement
A
230.3 mm (9.07 in.)
B
235.2 mm (9.26 in.)
C
84.5 mm (3.33 in.)
D
325.0 mm (12.79 in.)
for 3500 S plate RH side:


Reference measurement
Area
Measurement
A
230.3 mm (9.07 in.)
B
235.5 mm (9.26 in.)
C
101.6 mm (4.00 in.)
D
342.1 mm (13.47 in.)
(4) Install the name plate.
for 3500 SL plate LH side:


Reference measurement
Area
Measurement
A
230.3 mm (9.07 in.)
B
236.0 mm (9.29 in.)
C
84.5 mm (3.33 in.)
D
364.9 mm (14.37 in.)
for 3500 SL plate RH side:


Reference measurement
Area
Measurement
A
230.3 mm (9.07 in.)
B
236.0 mm (9.29 in.)
C
84.5 mm (3.33 in.)
D
364.9 mm (14.37 in.)
-