2007 Aurion TRD · Service Manual Exterior

Rocker Panel Moulding

Exterior

COMPONENTS
REMOVAL
1. REMOVE ROCKER PANEL MOULDING PROTECTOR
(a) Remove the 2 screws and rocker panel moulding protector.
-
2. REMOVE ROCKER PANEL MOULDING
(a) Put protective tape around the rocker panel moulding.


-
(b) Remove the 2 screws and grommet.
-
(c) Remove the screw.
-
(d) Remove the 7 clips.
-
(e) Remove the 2 screws.
-
(f) Disengage the 8 clips and remove the rocker panel moulding.
-
INSTALLATION
1. INSTALL ROCKER PANEL MOULDING
(a) Engage the 8 clips and install the rocker panel moulding.
-
(b) Install the 2 screws.
-
(c) Install the 7 clips.
-
(d) Install the screw.
-
(e) Install a new grommet.
-
2. INSTALL ROCKER PANEL MOULDING PROTECTOR
(a) Install the rocker panel moulding protector with the 2 screws.
-