Home › BRAKE › BRAKE › REAR BRAKE

REAR BRAKE > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.



1. REMOVE REAR WHEEL


2. DRAIN BRAKE FLUID

NOTICE:
If brake fluid leaks onto any painted surface, wash or remove it completely.



3. DISCONNECT REAR BRAKE FLEXIBLE HOSE


    C132824
  1. Remove the union bolt and the gasket from the rear disc brake cylinder assembly, then disconnect the rear flexible hose.



4. REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY


    C132823E01
  1. Hold the 2 rear disc brake cylinder slide pins and remove the 2 bolts and rear disc brake cylinder assembly.