REAR DOOR BELT MOULDING > INSTALLATION |
| 1. INSTALL REAR DOOR BELT MOULDING ASSEMBLY |
![]() |
Engage the clip and 6 claws, and install the rear door belt moulding assembly.
| 2. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP |
![]() |
Engage the 3 claws to install the rear door inner glass weatherstrip.
| 3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY |
![]() |
Engage the claw to install the No. 1 door scuff plate clamp.
Connect each connector.
![]() |
Engage the rear door trim board with the 4 clips of the rear door inner glass weatherstrip.
![]() |
Engage the 7 clips to install the rear door trim board to the rear door panel.
Install the 3 screws.
| 4. INSTALL DOOR ASSIST GRIP COVER |
![]() |
Engage the 6 claws and install the door assist grip cover.
| 5. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG |
![]() |
Engage the 3 claws to install the rear door inside handle bezel plug.