Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › TELEVISION CAMERA

TELEVISION CAMERA > INSTALLATION

for Preparation Click here



1. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/o Entry and Start System)


    E182578
  1. Install the rear television camera assembly with the 2 screws.

    Torque:
    1.0 N*m{ 10 kgf*cm , 9 in.*lbf }



2. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Entry and Start System)


    E182577
  1. Install the rear television camera assembly with the 2 screws.

    Torque:
    1.0 N*m{ 10 kgf*cm , 9 in.*lbf }



    E183655
  1. Connect the connector.

    NOTICE:
    Check that the connector is securely connected.

  1. Install the cushion tape.



    E183654
  1. Engage the clamp and wire harness.



    E183653E01
  1. Engage the 3 clamps, 3 guides and wire harness.



3. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH ASSEMBLY


    B135462
  1. Engage the 2 clips and install the luggage compartment door outside garnish assembly.



    B135460
  1. Install the 3 nuts.



4. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY


    B136497
  1. Install the luggage compartment door lock cylinder with the 2 nuts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }



    B136496
  1. Connect the cable and connector.



    B136492
  1. Connect the rod.



5. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    B135465
  1. Install the luggage compartment door cover with the 13 clips.



6. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP (w/ Assist Grip)


    B189102
  1. Install the luggage compartment door assist grip with the 2 screws.



    B189103
  1. Engage the 3 claws and close the assist grip cover.