SPEED SENSOR > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE BATTERY |
![]() |
Loosen the bolt and nut, and remove the battery clamp.
Remove the battery and battery tray.
| 3. REMOVE AIR CLEANER INLET ASSEMBLY |
![]() |
Remove the 2 bolts, clamp and air cleaner inlet.
| 4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY |
![]() |
Disconnect the mass air flow meter connector (*1).
Disconnect the purge VSV connector (*2).
Disconnect the 2 purge VSV vacuum hoses (*3).
Disconnect the purge line hose from the clamp (*4).
![]() |
Disconnect the No. 2 ventilation hose from the air cleaner hose.
![]() |
Lock the No. 1 air cleaner hose clamp, and then disconnect the No. 1 air cleaner hose from the throttle body.
![]() |
Remove the 2 bolts and air cleaner cap.
Remove the air cleaner filter element from the air cleaner case.
| 5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY |
![]() |
Disconnect the hose clamp.
Remove the 3 bolts and air cleaner case.
| 6. REMOVE SPEED SENSOR (NT SENSOR) |
![]() |
Disconnect the speed sensor connector.
Remove the bolt and speed sensor.
Remove the O-ring from the speed sensor.
| 7. REMOVE SPEED SENSOR (NC SENSOR) |
![]() |
Disconnect the speed sensor connector.
Remove the bolt and speed sensor.
Remove the O-ring from the speed sensor.