WIPER AND WASHER SYSTEM > FAIL-SAFE CHART |
| FRONT WIPER SYSTEM |
When the windshield wiper switch assembly is in any position other than "OFF" and the blades are frozen or a wiper pivot is seized, a malfunction is detected by the windshield wiper relay assembly (auto wiper relay) and the wiper operation is stopped.
When the rain sensor is malfunctioning and the windshield wiper switch assembly is in the INT position, the front wiper system will use the mode that the rain sensor determined to be appropriate before the rain sensor malfunctioned.
When the rain sensor overheats and the front wiper is in the HI operation mode, the front wiper system is changed to the LO operation mode.