Home › CRUISE CONTROL SYSTEM › CRUISE CONTROL › CRUISE CONTROL SYSTEM

CRUISE CONTROL SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



DTC CHECK


    C131975E01
  1. Connect the intelligent tester to the DLC3.



  2. C131976E01
  3. Turn the ignition switch to the ON position.

  4. Read the DTCs by following the prompts on the tester screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.


DTC CLEAR
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to the ON position.

  3. Operate the intelligent tester to erase the codes.

    HINT:
    Refer to the intelligent tester operator's manual for further details.